HOWARD HOWARD RESTOR-A-FINISH CHERRY 237 ML HPRF9008

Restor-A-Finish

Wipe-on Wipe-off Restored

Colour: Cherry

For almost 50 years, Howard’s Restor-A-Finish has been a standard in the antique industry. Because Restor-A-Finish preserves the original wood finish, it also helps preserve its authenticity and value, whereas stripping the finish may literally strip the piece of its value.

Restor-A-Finish penetrates faded lacquer, shellac, and varnish finishes to bring back the original color and luster. It restores the depth of grain, going much deeper than temporary scratch cover products.

Restor-A-Finish penpermanently restores most wood finishes without removing any of the existing finish – this is why it is very popular for antiques.

Restor-A-Finish maintains the original ‘patina’ of an antique finish – so it maintains its character and value as an antique.Feed-N-Waxis recommended as a follow-up to Restor-A-Finish to protectthe newly restored finish.

Features

Permanently revive and restore the original color and luster in one step, without removing any of the existing finish.

Most wood finishes that seem to need a complete refinishing job can be completely restored in a few minutes with this simple wipe-on, wipe-off process.

White heat rings and water marks, sun fade, oxidation, smoke damage, and most other blemishes can be quickly blended away. Before you go to the extreme of stripping it, try restoring it!

• Simple wipe-on, wipe-off application
• Permanently restores the existing varnish, lacquer or shellac – without removing it
• Penetrates through the existing finish to restore color and luster
• Restores any wood or finish shade utilizing nine different colors

Restor-A-Finish Helps To Remove

• White Heat Rings
• Water Marks
• Smoke Damage & Oxidation

Restor-A-Finish Helps To Revive

• Faded Finishes
• Minor Crazed or Checked Finishes
• Light Scratches & Abrasions

Colours

Almost any existing wood tone, from a light Birdseye Maple to a dark Jacobean, can be closely matched using one of the nine available finish colors.

Restor-A-Finish should be used in a color that best matches your finish. If you are uncertain about which color to use, then chose a color slightly lighter than your finish.

It s recommended that you test Restor-A-Finish in an inconspicuous spot to make sure you like what it does and how it matches the finish.

Then to protect your newly restored finish, useFeed-N-Wax.

Specifications

HPRF9008Arts/Crafts > Finishing/Cleaning Products > Wood