50% OFF! Hot items selling fast—Grab them before they're gone!
Unconditional Satisfaction GuaranteeNo Shipping Fees Above 302 Months to Decide. Returns Simplified.OXD3151500K Dial Indicating Bore Gauges 29mm 11/8″ Dial Diameter Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A datum point’ can be set by using a setting ring of a known diameter or a micrometer. Zero’ the gauge to this datum point by rotating the bezel to align zero’ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ocking’ the gauge back and forth until the smallest diameter is found. All models have interchangeable anvils to cover a range of bore sizes.
