Fluke 773 – Milliamp Process Clamp Meter

The Fluke 773 milliamp clamp meter is accurate, versatile, and highly portable. It saves time and money by measuring 420 mA signals five times faster than with traditional multimeters, and without breaking the loop. That means you can troubleshoot a live device without having to power down and possibly miss something going on in the process.The 773 is ideal for troubleshooting transmitters, valves, and programmable logic controllers (PLCs) found in process plants. The 773 allows you to connect to a mA loop in a traditional series workflow to measure, source, or simulate a control system. And it measures up to 99.0 mA non-contact, including 10 to 50 mA signals in older control systems.The 773 also sources and measures DC voltage, so it can be used to troubleshoot voltage input and output devices that accept a 1-5 V or 0 to 10 V signal. You can detach the clamp section of the meter and use it as a remote jaw, connected to the main body by an extension cable to make it easier to take measurements in tight spaces.IncludesFour AA alkaline batteries (installed)Soft carrying caseTL75 test leadsAC 72 detachable clipTL 940 mini hook test leadsInstruction sheetHanging tool with hook and loop strapFluke 773 Milliamp Process Clamp MeterFeaturesMeasure 4 to 20 mA signals without breaking the loopSource/simulate 4 to 20 mA signals and provide loop powerSource/measure DC voltage to verify power supplies or I/O signalsBest in class accuracy of 0.2%Delivers 0.01 mA resolution and sensitivitySpecificationsDiameter of measurable conductor: 0.177″ or 4.5 mm maxOperating temperature: -10C to 50CStorage temperature: -25C to 60COperating humidity: < 90% @ <30C, < 75% @ 30 to 55COperating altitude: 0 to 2000 mIP rating: IP40Size: 44 x 70 x 246 mm (2 7/8 x 5 3/4 x 11 5/8 in)Weight: 410 g (14.4 oz)Vibration: Random 2 g, 5 to 500 HzShock: 1 meter drop test (except the jaw)EMI/RFI: Meets EN61326-1Temperature coefficient: 0.01%/C (<18C or >28C)Power, battery life: 4x AA 1.5 V Alkaline (IEC LR6), 12 hours in mA source into 500 ohmsWarranty: Three years for electronics / One year for cable and clamp assemblymA measurement (measured by clamp)Resolution/range: 0 to 20.99 mAAccuracy: 0.2% + 5 countsResolution/range: 21.0 mA to 100.0 mAAccuracy: 1% + 5 countsmA measurement (measured in series with test jacks)Resolution/range: 0 to 24.00 mAAccuracy: 0.2% + 2 countsmA source (maximum mA drive: 24 mA into 1,000 ohms)Resolution/range: 0 to 24.00 mAAccuracy: 0.2% + 2 countsmA simulate (maximum voltage 50 V dc)Resolution/range: 0 to 24.00 mAAccuracy: 0.2% + 2 countsVoltage source (2 mA maximum drive current)Resolution/range: 0 to 10.00 V DCAccuracy: 0.2% + 2 countsVoltage measureResolution/range: 0 to 30.00 V DCAccuracy: 0.2% + 2 counts