Fluke 902FC – HVAC Clamp Meter True-RMS

The Fluke 902 FC Clamp Meter, with Fluke Connect wireless connectivity, can help HVAC technicians improve productivity in the field. The rugged dual-rated CAT III 600 V, CAT IV 300 V meter equips you to perform many essential HVAC system measurements: microamps for testing pilot light sensors; resistance up to 60 k; AC current and AC/DC voltage; capacitance; and contact temperature, all with just one tool. Plus its small form factor makes it easy to hang on to and navigate in tight work spaces.As part of the Fluke Connect family, the 902 FC can transmit measurements to a smartphone or tablet for later, detailed analysis. No need to write down the results. Trend and monitor measurements live on your phone screen, and upload those measurements to the cloud. Combine measurement data from multiple Fluke Connect test tools to create and share reports from the job site via email, and collaborate in real time with other colleagues with ShareLive video calls or email.The 902 FC can also decrease the frequency of wearing personal protective equipment (PPE) when working on high voltage/current panels. Simply turn off the panel. Verify that it is de-energized using standard safety procedures. Place the clamp and synch it to a smartphone. Close the panel, reenergize it, and take measurements from a safe distance.IncludesTL75 test leads (1 pair)80BK integrated DMM temperature probe (1)AA alkaline batteries (2)Soft carrying caseUser’s manualFeaturesA wireless Fluke Connect-enabled clamp meter designed specifically for the needs of HVAC techniciansOffers 200 A DC current measurements to measure flame rodExtends resistance range to measure thermistors up to 60kCaptures flue gas temperatureMeasures start and run motor capacitorsMeasures variable frequency drive performanceSpecificationsMaximum voltage between any terminal and earth ground: 600 VBattery type: 2 AA alkaline batteries (NEDA 15A, IEC LR6)TemperatureOperating: 10 C to +50 C (14 F to +122 F)Storage: 40 C to +60 C (40 F to +140 F)Operating humidityNon-condensing (< 10 C / 50 F)90% RH at 10 C to 30 C (50 F to 86 F)75% RH at 30 C to 40 C (86 F to 104 F)45% RH at 40 C to 50 C (104 F to 122 F)AltitudeOperating: 3,000 m (9,842 ft)Storage: 12,000 m (39,370 ft)Dimensions: 230 83.7 45.4 mm (9.06 3.30 1.39 in)Weight (meter only): 419 g (15 oz)SafetyIEC 61010-1, Pollution Degree 2IEC 61010-2-032: CAT III 600 V / CAT IV 300 VIEC 61010-2-033: CAT III 600 V / CAT IV 300 VIP rating: IEC 60529 IP30 (non-operating)Radio frequency certification: FCC ID T68-FBLE; IC 6627A-FBLEElectromagnetic compatibility (EMC)IEC 61326-1: Portable, electromagnetic environmentIEC 61326-2-2; CISPR 11 Group 1, Class AKorea (KCC): Class A equipment (industrial broadcasting & communication)USA (FCC): 47 CFR 15 Subpart B; exempt device per clause 15.103Temperature coefficientsAdd 0.1 specified accuracy per C above 28 C or below 18 CAccuracy SpecificationsA AC (via jaw)Resolution: 0.1 AAccuracy: 2.0% 5 digits (4565 Hz)Accuracy: 2.5% 5 digits (65400 Hz)Range: 600.0 ACrest factor (50 Hz or 60 Hz)2.5 minimum @ 220 A> 1.4 minimum @ 600 AAdd 2% for CF > 400 AV ACResolution: 0.1 VAccuracy: 1.5% 5 digitsRange: 600.0 VV DCResolution: 0.1 VAccuracy: 1.5% 5 digitsRange: 600.0 VResistance (Ohms)Resolution: 0.1 / 1 / 10Accuracy: 1% 5 digitsRange: 600 / 6000 / 60.00 kCapacitanceResolution: 0.1 / 1 FAccuracy: 1% 4 digitsRange: 100.0 / 1000 FAResolution: 0.1 AAccuracy: 1% 5 digitsRange: 200 AContact TemperatureResolution: 0.1 C / FAccuracy: 1% &plusm