Amana AMA-AMS-147 3PCS C/T V-Groove 90, 108 and 135 Deg. Angles for Double Edge Folding Aluminum Composite Material (ACM) Panels

Carbide tipped double edge folding V groove and rectangular groove (for thicker walls) industrial router bits for shaping Aluminum Composite Materials (ACM) such as Alucobond, Dibond and other brands alike.Designed for scoring the following aluminum/plastic composite materials with90,108,135angles (with flat bottoms) and rectangular groovesApplicationsAcetateAcrylonitrile-Butadiene-Styrene (ABS)Aluminum, Brass, Bronze, Clay, Zinc & Wood Composite PanelsAluminum 5052Aluminum Composite Materials (ACM)Aluminum Composite Panel (ACP)*ALPOLIC Copper Composite Material (CCM)AlcubondAlupanelBakeliteDibondDurabond**e-panelEtalbondLexanNylonPE and FR CoresPhenolicsPlastic/AcrylicPlexiglasPVCStainless Steel Composite Material (SCM)Titanium Composite Material (TCM)WoodAluminum Composite Panel (ACP) is a type of ACM flat panel that consists of two thin aluminum sheets bonded to a non-aluminum core and is widely used as cladding for many diverse applications such as interior and exterior office buildings, external cladding or facades of buildings, hospitals, convention centers, airports, hotels, insulation and signage.**Durabond is a polyethylene core with 0.3mm colored aluminum sheet on either side, pre-finished requiring no decoration.Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding the remaining material by hand.Specially designed router bits are used to route V-grooves in the above materials to allow easy bending without cracking the bent area. Route within 0.8mm from the bottom of the composite panel to achieve a clean bend/radius. Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding the remaining material by hand. Ideal for wall panel fabrication.