VACUUM BRAKE BLEEDER FEATURES & BENEFITS
- Large 4L capacity collection container
- Quickly dispose of waste fluid via small remote cap
- Storage point for bleeder fitting prevents fluid leakage from hose when not in use
- High efficiency vacuum generator
- High quality quick-release coupler
- Overflow shut-off valve
- Locking air trigger
INSTRUCTIONS
- Drain old fluid from brake master cylinder reservoir and top up with new fluid
- Begin bleeding procedure on the wheel(s) furthest from the master cylinder
- Connect rubber bleeder fitting to the calliper bleed nipple and open nipple 1/4 turn only
- Operate brake bleeder and allow fluid to flow until clear fluid is seen in tube
- Close off bleed nipple
- Top off fluid level
- Repeat procedure on each wheel
IMPORTANT: AT THE COMPLETION OF BLEEDING,CHECK FOR FIRM BRAKE PEDAL
Unconditional Satisfaction Guarantee
