ACTION CAN DM-90 500MLDRY MOLY SPRAY CAN32798

DM-90 – Dry Moly Spray Lubricant

500ml Aerosol

DM-90 is an extreme pressure, resin-bonded, dry film lubricant containing a high Molybdenum Disulphide content. When applied to metal surfaces the Molybdenum Disulphide (MoS2/ Moly ) provides a tough, durable coating that reduces friction and wear preventing galling, seizing and sticking.

Effectively lubricates where wet lubricants cannot be used or do not provide adequate lubrication. Due to the dry nature of the film, it will not attract dirt or dust, resulting in smooth operation of moving parts. For use in high load and varying temperature conditions: -150 to +400 C.

It has excellent resistance to water with outstanding protection against corrosion and the ideal dry lubricant for harsh and challengin

Application

Use DM-90 where a dry-film lubricant is specified, or where difficult operating conditions are normal, e.g. high temperature, high load, slides, rollers, wheels, gears, chains & h

Key Features

• Excellent extreme pressure lubricant
• Contains concentrated Molybdenum Disulphide (MoS2)
• Prevents galling, seizing and sticking; reduces friction and wear
• Provides a tough, durable, resin-bonded dry film coating
• Ideal for use in harsh, corrosive, dusty and challenging environments
• >65% Moly in cured film

Application

Highly effective dry lubricant with superior ‘slip’ properties. Use on chutes, slides and pins, etc. where a wet or oily lubricant cannot be used. Particularly effective in low load, high speed applications. Use on saw blades (cutting timber) as an anti-stick treatment that reduces sap adhesion or moisture sticking.

Directions for use

• Ensure that the intended application surface is clean, dry and free from grease.
• Shake the can until the agitator ball is free and continue to agitate for a further minute.
• Hold the can upright and spray a thin, even coating from 15 20 cms.
• The film will be touch dry after 2 3 minutes.
• Ready for use after approximately 2 hours.
• The film can be lightly polished with a soft lint-free cloth to improve performance.

Technical parameters:

CAN32798Specialist Aerosols > Lubricants > Dry Moly Spray