BUILDMATE Wadfow Wire Cup Brush Set 1/4″ Shank 3″ | 4″ INCH [SOLD PER SET] Wire Wheel Crimped Brushes For Angle Grinder Surface finishing Tools WCE4401 | WCE4402 WHT

BUILDMATE Wadfow Wire Cup Brush Set 1/4″ Shank 3″ | 4″ INCH [SOLD PER SET] Wire Wheel Crimped Brushes For Angle Grinder Surfacefinishing Tools WCE4401 | WCE4402 WHT

AVAILABLE IN:
3″ INCH WCE4401
4″ INCH WCE4402

SPECIFICATIONS:
Model: WCE4401
Diameter: 75mm 3″ Inch
Shank Diameter: 1/4″ Inch
Wire Diameter: 0.3mm
Wire Length: 16mm
No-load Speed: 4500r/min
Apply on planning deburring edge honing descaling paint stripping weld seams
Suitable for Steel Cast steel Soft wood Hard wood

SPECIFICATIONS:
Model: WCE4402
Diameter: 100mm / 4″ Inch
Shank Diameter: 1/4″ Inch
Wire Diameter: 0.3mm
Wire Length: 22mm
No-load Speed: 4500r/min
Apply on planning deburring edge honing descaling paint stripping weld seams
Suitable for Steel Cast steel Soft wood Hard wood

FEATURES:
Wire cup brush is a surface finishing tool that features knot-crimped carbon steel wires.
The abrasive brushing cup is made from oil hardened and tempered steel wires that ensure a fast and effective surface brushing.
Use the wire brush for deburring, brushing, and cleaning large size steel surfaces. The surface finish brush has premium-grade wires attached to a small-sized cup and is rated for a high rotational speed.
Easily mountable wire brush with threaded arbor ensures smooth brushing action with flare control for enhanced brush life.
Safe and stable: the inner and outer fixed plates of the angle grinder wire cup wheel brush are made of thickened steel, which can effectively avoid wire flying and breakage during heavy work; The weight ratio is passed precise calculations, so as to provide good balance and stability
Easy To Use: The design of this wire cup allows direct gentle pressure to ensure a full contact between the wires and the surface so as to get the best performance.