Fluke 376FC – Clamp Meter True-RMS

The Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.Find the cause of difficult problemsThe 376 FC clamp meter uses an integrated low-pass filter for accurate measurements of non-linear signals, such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.Includes18-inch iFlex Flexible Current ProbeTPAK magnetic hanging strapTL75 Test LeadsTwo AA batteries (Installed)Soft carrying caseCoated instruction cardSafety information sheetFeaturesMeasures AC/DC current with included iFlex current probeVFD low pass filter for accurate measurements of non-linear signalsRemotely log, trend and monitor to pinpoint intermittent faultsInrush measurement to filter out noise and capture starting currentSpecificationsMaximum voltage between any terminal and earth ground: 1000 VBatteries: 2 AA, NEDA 15A, IEC LR6Operating temperature: -10 C to +50 CStorage temperature: -40 C to +60 COperating humidity (non-condensing <10 C):90% RH at 10 C to 30 C,75% RH at 30 C to 40 C,45% RH at 40 C to 50 COperating altitude: 2000 mStorage altitude: 12,000 mSize (L W H): 249 85 45 mmWeight: 395 gJaw opening: 34 mmFlexible current probe diameter: 7.5 mmFlexible current probe cable length (head to electronics connector): 1.8 mSafety:IEC 61010-1Pollution Degree 2IEC 61010-2-032 CAT III 1000 V / CAT IV 600 VIEC 61010-2-033 CAT III 1000 V / CAT IV 600 VIP rating: IEC 60529 IP30, non-operatingRadio Frequency: 768FBLE, IC: 6627A-FBLEAccuracy SpecificationsAC Current via JawRange: 999.9 AResolution: 0.1 AAccuracy:2% 5 digits (10 Hz to 100 Hz)2.5% 5 digits (100500 Hz)Crest Factor (50 Hz/60 Hz):3 @ 500 A2.5 @ 600 AAdd 2% for C.F. >2AC Current via Flexible Current ProbeRange: 2500 AResolution:0.1 A ( 600 A)1 A ( 2500 A)Accuracy: 3% 5 digits (5500 Hz)Crest Factor (50/60 Hz): 3.0 at 1100 A2.5 at 1400 A1.42 at 2500 AAdd 2% for C.F. >2Position Sensitivityi2500-10 Flex / i2500-18 FlexPosition ADistance from Optimum: 0.5 in (12.7 mm) / 1.4 in (35.6 mm)Error: 0.5 %Position BDistance from Optimum: 0.8 in (20.3 mm) / 2.0 in (50.8 mm)Error: 1.0 %Position CDistance from Optimum: 1.4 in (35.6 mm) / 2.5 in (63.5 mm)Error: 2.0 %DC CurrentRange: 999.9 AResolution: 0.1 AAccuracy: 2% 5 digitsAC VoltageRange: 1000 VResolution:0.1 V (600.0 V)1 V (1000 V)Accuracy: 1% 5 digits (20 Hz to 500 Hz)DC VoltageRange: 1000 VResolution:0.1 V (600.0 V)1 V (1000 V)Accuracy: 1% 5 digitsmV dcRange: 500.0 mVResolution: 0.1 mVAccuracy: 1% 5 digitsFrequency via JawRange: 5.0 Hz to 500.0 HzResolution: 0.1 HzAccuracy: 0.5% 5 digitsTrigger level:5 Hz to 10 Hz, 10 A10 Hz to 100 Hz, 5 A100 Hz to 500 Hz, 10 AFrequency via Flexible Current ProbeRange: 5.0 Hz to 500.0 HzResolution: 0.