Fluke i400s – AC Current Clamp

Fluke current clamps extend the current ranges of digital multimeters, power quality analyzers, and portable oscilloscopes and are available for both AC and AC/DC environments. The Fluke i400s is specially designed to offer maximum utility in a compact shape and is the only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating.FeaturesCompanion to your scope or power quality meter to measure up to 400 A ACOnly current clamp available with a CAT IV 600 V / CAT III 1000 V safety ratingSpecially designed to offer maximum utility in a compact shapeTake accurate current readings without breaking the circuitSoft non-slippery overmold handleOptional PM9081/001 BNC/Banana adapter for DMM’sTwo ranges: 40 A and 400 A, 10 and 1 mV/Amp outputMax. conductor 32 mmSpecificationsCurrent rangesNominal current range: 40 A40 A Range: 0.5 A to 40 A400 A Range: 5 A to 400 ABasic accuracy40 A Range: 2% + 0.015 A (45-400 Hz)400 A Range: 2% + 0.04 A (45-400 Hz)Phase shift40 A Range0.5 to 1 A: Unspecified1 A to 5 A: 45 A to 10 A: 310 A to 20 A: 320 A to 40 A: 240 A to 400 A: NA400 A Range0.5 to 1 A: NA1 A to 5 A: NA5 A to 10 A: Unspecified10 A to 20 A: 220 A to 40 A: 240 A to 400 A: 1.5Typical bandwidth40 A Range: 5 Hz – 10 kHz400 A Range: 5 Hz – 10 kHzOutput level(s)40 A Range: 10 mV/A400 A Range: 1 mV/ACrest factor40 A Range: 3400 A Range: 3 to 300 A 2.5 to 400 ASafety specificationsSafety: CAT IV, 600 V, CAT III, 1000 VMaximum non-destructive current: 1000 V ACMechanical and general specificationsWarranty: 1 yearMaximum conductor size: 32 mm (1.25 inches)Output cable length: 2.5 m (8.2 ft)BNC adapter: YesDimensions: 150 x 70 x 30 mmWeight: 114 g