HiKOKI KC36D13PPMZ – 3618V 13 Piece Combo Kit (3 x 525Ah)

Includes (1) DV36DC(H4Z) – 36V Brushless Hammer Drill Driver (1) WH36DC(H4Z) – 36V Brushless Triple Hammer Impact Driver (1) WR36DE(H4Z) – 36V Brushless Mid-Torque 1/2″ Impact Wrench (1) CR36DA(H4Z) – 36V Brushless Recipro Saw (1) C3607DB(H4Z) – 36V Brushless 185mm Circular Saw (1) AL18DA(H4Z) – 18V Grease Gun (1)UR18DA(H4Z) – 18V Bluetooth DAB Radio (1) DH3628DA(H4Z) – 36V Brushless SDS+ Rotary Hammer (1) G3613DVE(H4Z) – 36V Brushless Angle Grinder with Slide Switch (1) CV18DA(H4Z) – 18V Brushless Multitool (1) CJ36DA(H2Z) – 36V Brushless D-Handle Jigsaw (1) WR36DF(H4Z) – 36V Brushless 3/4″ Drive High Torque Impact Wrench (1) RB18DC(H4Z) – 18V Blower (3) BSL36A18 – 18V 5.0Ah / 36V 2.5Ah MultiVolt Battery (1) UC18YSL3 – Rapid Charger DV36DC(H4Z) – 36V Brushless Hammer Drill Driver Whether you’re taking on a big job or tightening or loosening screws, the HiKOKI 36V Brushless Impact Driver Drill DV36DC will help you get the job done faster and easier! Featuring Reactive Force Control (RFC), durable design resistant to heat generation and side handle that can be mounted in 11 different positions. RFC (Reactive Force Control) – When the gyroscope sensor built in the controller detects a predetermined angle, the motor stops automatically to prevent excessive jerking of the tool LED Light warning signals occur with RFC and when the tool is overburdened or overheats Due to the highly durable design that is resistant to heat generation, it is difficult to stop even during continuous work. The side handle can be mounted in 11 different positions to improve workability. Compatible with the HiKOKI MultiVolt battery Voltage: 36V Motor type: Brushless Switch type: Trigger Drill chuck type: Keyless metal chuck Chuck capacity: 1.5-13mm Light LED: White Clutch stages: 22 (Torque 1.5 -8.0Nm) Maximum Torque Hard Joint: 155Nm Maximum Torque Soft Joint: 100Nm No load speed – low: 0-550rpm No load speed – high: 0-2200rpm Capacity Brick & Masonary: 22mm Steel & Aluminium: 20mm Wood hole saw: 118mm Wood self feed bit: 95mm Small screw: M6 Wood screw: M16 x 100mm RFC (Reactive Force Control): Yes Forward / Reverse Mode: Yes Dimensions (LxHxW) including the battery: 190 x 267 x 89mm Weight: 2.1kg Battery Compatible with HiKOKI MultiVolt battery WH36DC(H4Z) – 36V Brushless Triple Hammer Impact Driver High torque impact driver 5 Modes (Max, Bolt, Bolt Single, Soft, Self Drilling) IP56 dust & water resistance* Triple Hammer for high efficiency 3 LED light provides more visibility in dark and compact areas Power: 36V Motor: Brushless Capacity Small screw*: 4 to 10 mm (5/32″ to 3/8″) Ordinary bolt: 5 to 18 mm (3/16” to 23/32”) High tension bolt: 5 to 14 mm (3/16” to 9/16”) Self drilling screw: 3.5 to 6 mm (1/8″ to 1/4″) in diameter Tightening torque* Power mode: 215 Nm Bolt mode: 215 Nm Soft mode: 76 Nm No-load speed (with a battery fully charged at 20C) Power mode: 0 to 3,400 min- Bolt mode: 0 to 2,900 min- Bolt single mode: 0 to 2,900 min- Soft mode: 0 to 900 min- Self drilling screw mode: 0 to 3,700 min- Impact rate (with a battery fully charged at 20C) Power mode: 0 to 4,100 min- Bolt mode: 0 to 4,100 min- Bolt single mode: 0 to 4,100 min- Soft mode: 0 to 2,000 min- Self drilling screw mode: 0 to 2,200 min- Drive: 6.35 mm (1/4) bit holder Type of switch: Variable speed trigger switch with forward/reverse changeover lever (with brake) LED light: White LED (Always ON, Light only SW-ON, and Always OFF) Weight: 1.6 kg Dimensions (L x H ): 114 x 241 mm WR36DE(H4Z) – 36V Brushless Mid-Torque 1/2″ Impact Wrench Efficient brushless motor Powerful tightening & loosening torque Compact at 169mm in length IP56 dust & water resistant Capacity Tightening torque*: 770Nm Nut busting torque*: 1,050N