HiKOKI KC36DC(HRZ) – 36V Brushless 2 Piece Drill/Driver Combo Kit DC (2 x 5/2.5Ah)

IncludesDV36DC – 36V Brushless Impact Driver DrillWH36DC – 36V Brushless 1/4″ Impact Driver2 x BSL36A18 – MultiVolt Battery (A)UC18YSL3 – Rapid ChargerStackable Carry CaseDV36DC – 36V Brushless Impact Driver DrillWhether you’re taking on a big job or tightening or loosening screws, the HiKOKI 36V Brushless Impact Driver Drill DV36DC will help you get the job done faster and easier! Featuring Reactive Force Control (RFC), durable design resistant to heat generation and side handle that can be mounted in 11 different positions.RFC (Reactive Force Control) – When the gyroscope sensor built in the controller detects a predetermined angle, the motor stops automatically to prevent excessive jerking of the toolLED Light warning signals occur with RFC and when the tool is overburdened or overheatsDue to the highly durable design that is resistant to heat generation, it is difficult to stop even during continuous work.The side handle can be mounted in 11 different positions to improve workability.Compatible with the HiKOKI MultiVolt batteryVoltage: 36VMotor type: BrushlessSwitch type: TriggerDrill chuck type: Keyless metal chuckChuck capacity: 1.5-13mmLight LED: WhiteClutch stages: 22 (Torque 1.5 -8.0Nm)Maximum Torque Hard Joint: 155NmMaximum Torque Soft Joint: 100NmNo load speed – low: 0-550rpmNo load speed – high: 0-2200rpmCapacityBrick & Masonary: 22mmSteel & Aluminium: 20mmWood hole saw: 118mmWood self feed bit: 95mmSmall screw: M6Wood screw: M16 x 100mmRFC (Reactive Force Control): YesForward / Reverse Mode: YesDimensions (LxHxW) including the battery: 190 x 267 x 89mmWeight: 2.1kgBattery Compatible with HiKOKI MultiVolt batteryIncludesSide handleHookDriver bitWH36DC – 36V Brushless 1/4″ Impact DriverHigh torque impact driver5 Modes (Max, Bolt, Bolt Single, Soft, Self Drilling)IP56 dust & water resistance*Triple Hammer for high efficiency3 LED light provides more visibility in dark and compact areasPower: 36VMotor: BrushlessCapacitySmall screw*: 4 to 10 mm (5/32″ to 3/8″)Ordinary bolt: 5 to 18 mm (3/16” to 23/32”)High tension bolt: 5 to 14 mm (3/16” to 9/16”)Self drilling screw: 3.5 to 6 mm (1/8″ to 1/4″) in diameterTightening torque*Power mode: 215 NmBolt mode: 215 NmSoft mode: 76 NmNo-load speed (with a battery fully charged at 20C)Power mode: 0 to 3,400 min-Bolt mode: 0 to 2,900 min-Bolt single mode: 0 to 2,900 min-Soft mode: 0 to 900 min-Self drilling screw mode: 0 to 3,700 min-Impact rate (with a battery fully charged at 20C)Power mode: 0 to 4,100 min-Bolt mode: 0 to 4,100 min-Bolt single mode: 0 to 4,100 min-Soft mode: 0 to 2,000 min-Self drilling screw mode: 0 to 2,200 min-Drive: 6.35 mm (1/4) bit holderType of switch: Variable speed trigger switch with forward/reverse changeover lever (with brake)LED light: White LED (Always ON, Light only SW-ON, and Always OFF)Weight: 1.6 kgDimensions (L x H ): 114 x 241 mm