Makita DK0248G201 – 40V Max Brushless 2 Piece Combo Kit (2 x 40Ah)

Includes (1) 40V Max Brushless Hammer Driver Drill (HP003GZ) (1) 40V Max Brushless Impact Driver (TD001GZ) (2) 40V Max 4.0Ah Battery High Output (BL4040F) (1) 40V Max Single Port Rapid Charger (DC40RA) (1) Tote Bag (832319-7) HP003GZ -40V Max Brushless Hammer Driver Drill Heavy duty power with 180Nm peak torque 3 mode operation: Hammering, Drilling, Driving Active feedback sensors shut down the tool in the event of a kickback Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity Electronic clutch for selecting between 41 torque range settings Impact rate:Hi: 0 – 36,000ipm / Med: 27,000ipm/ Lo: 0 – 9,750ipm Max. drilling capacities in steel:20mm Max. drilling capacities in wood:Auger bit: 50mm/ Self-feeding bit: 92mm/ Hole saw: 152mm Max. peak torque:180Nm Max. tightening torque:Hard: 150Nm/ Soft-High: 28Nm / Med:36Nm/ Low: 88Nm No load speed:Hi: 0 – 2,400rpm / Med: 0-1,800rpm/ Lo: 0 – 650rpm Overall length:197mm Skin weight:2.1kg Voltage:40V Max Weight (with battery):3.1kg (BL4040) TD001GZ – 40V Max Brushless Impact Driver (Tool Only) Heavy duty power with 220Nm max. torque Precision fastening with enhanced anvil stability for less bit wobble Optimised application selector with 6 modes adapting speed and impacts for each task Single hand quick change trigger allows user to change between speeds and modes at the touch of a button Constant speed control allows tool to operate at the same speed regardless of battery capacity Drive Shank: 6.35mm (1/4″) Hex Impact Rate: Max.: 0 – 4,400ipm / Hard: 0 – 3,600ipm / Med: 0 – 2,600ipm / Soft: 0 – 1,100ipm Max. capacities high tensile bolt: M5 – M14 Max. capacities standard bolt: M5 – M16 Max. tightening torque: Max.: 220Nm / Hard: 170Nm / Med: 50Nm / Soft: 20Nm No Load Speed: Max.: 0 – 3,700rpm / Hard: 0 – 3,200rpm / Med: 0 – 2,100rpm / Soft: 0 – 1,100rpm Overall Length: 120mm Skin weight: 1.0kg Voltage: 40V Max Weight (with battery): 1.7kg (BL4025) BL4040F – 40V Max 4.0Ah High Output Battery High Output battery, designed to produce a 35% increase in power versus the standard 4.0Ah battery Battery runs cooler maintaining performance under continuous heavy load Digital communication between the tool & battery for optimised performance Heavy duty cell casing significantly improves the batteries impact resistance 3-layer moisture protection shields cells from water ingress Cell Capacity:4.0Ah High Output Charge Time:45mins Energy Capacity:144Wh Net Weight:0.94kg Voltage:40V Max DC40RA -40V Max Single Port Rapid Charger Rapid charging system communicates data between battery and charger for optimum charging Equipped with dual cooling fans, cooling the battery & charging circuit for rapid charging Compatible with ADP10 adaptor (optional accessory) for charging 18V LXT batteries Large charging status indicator light & selectable full charge melody Charge time: BL4080F: 76mins BL4050F: 50mins BL4040/F: 45mins BL4025: 28mins BL1860B (w/ ADP10): 40mins BL1850B (w/ ADP10): 40mins BL1840B (w/ ADP10): 29mins BL1830B (w/ ADP10): 22mins Overall length: 156mm Weight: 1.0kg Voltage:40V Max 832319-7 -Gate Mouth Tool Carry Bag – 350mm Heavy-duty design & build Wide deep main pocket provides quick toollocationand easy access Detachable 34mm wide adjustable shoulder strap 5 external pockets Height:250 Width:220 Length:350