50% OFF! Hot items selling fast—Grab them before they're gone!
Unconditional Satisfaction GuaranteeNo Shipping Fees Above 302 Months to Decide. Returns Simplified.Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and finish in one operation.
SIZE: 115
GRIT: P40
SURFACE : Flat
Apply light pressure when finishing welds. The flap disc is flexible and will tend to follow the contours of whatever you are grinding.
Wear eye, face, body and respiratory protection.
Grit recommendation
| Grit | Materials |
| 24-40 | Aluminium, soft non ferrous metals, wood and plastic |
| 36-50 | Unalloyed or low alloyed steels, and low tensile strength stainless steels |
| 60 | High-alloyed, stainless and tempering steels |
| 80 | High-alloyed steels and fine finish on all metals |
| 120 | For extra fine finish on all materials |
To extend the service life on a flap disc, lower the speed to half of the MAX rpm rated on the disc. This could extend the service life almost 100%. This can be accomplished by using a variable speed angle grinder.
| Description | Value |
| Size | 115mm |
| Grit | P40 |
| Bore | 22.23mm |
| Max RPM | 13,300 rpm |
| Bevel | Flat |
TCFD115-3-40Abrasive/Grinding/Polish > Flap Discs > Stainless Steel
