Tork Craft Masonry DRill Bit 12 X 400mm DR83120

Drill bit for Masonry

Drill diameter: 12.0mm
Length: 400mm
Drill bit: TCT (Tungsten carbide tipped)

Application:

The drill bit is used to drill holes in masonry, thanks to the uniquely designed TCT (tungsten carbide tipped) point.

A percussion (hammer action) drill with a 3 jaw chuck is required. Preset the depth gauge on the drill to achieve the correct depth before drilling into walls.

TIP:
Have a wall scanner (detector) ready before drilling into walls.

CAUTION:
Do not use the drill bit with a rotary hammer. The impact energy will break the conversion chuck.